Game console repair
Xbox that will not turn on, shows no light or switches off at once? We find the failed part on the board and repair it.
We don't quote repairs online: every device is inspected before anything is charged. Diagnostics are free.
An Xbox One, One S, One X or Series S|X that will not power on usually has a failed component on the board rather than a faulty cable: a power chip, a capacitor or a damaged trace. We start with the simple checks (power brick, cable and outlet), then open the console and measure the power rails under a microscope to find the part that failed. We replace only that part, so the whole board does not have to be written off. Before any work starts we tell you what we found and what it takes to fix it, and afterwards we test power, video, sound and the controllers.
Common signs
If one of these matches what you are seeing, bring the device in. The diagnostic is free, and you decide after the quote.
The console shows no sign of life: no light, no fan, no sound
No picture even with a different HDMI cable and TV
It restarts by itself, or shuts off a few seconds after turning on
It smells burnt, or a power brick gets hot while the console stays dead
Why it happens
Knowing the cause helps you avoid it next time, and helps us find the fault faster.
A power spike or a failing power brick can burn a chip or a capacitor on the board.
A hit or a drop can crack solder joints under a chip, so it works until the board warms up, then fails.
Years of heat and dust age the components around the processor, and one of them gives out.
Before you bring it in
Small steps that save time and protect your device.
Do not keep trying the console if it smells burnt or the brick is hot: unplug it.
Try another HDMI cable, another TV input and, if you can, another power outlet.
Bring the power brick and the HDMI cable with the console so we can test the whole set.
At the bench
The steps of this repair, in the order they happen at our Clintonville bench.
No power, no picture or a boot loop: we measure the board on the bench to find the failed component.
The console is opened and the board is cleaned of dust, residue and corrosion that hide the fault.
A failed chip, a power part or a damaged trace is repaired or replaced under the microscope.
Power, video, sound, ports, storage and controllers are tested once the console is alive again.
Typical turnaround for this repair: 3 h
Find us
Need Xbox No Power Repair? Our repair shop at 4971 N High St in Clintonville is about 12 minutes from Upper Arlington, 15 from Grandview Heights and 15 from Dublin. Walk in during business hours, or request a quote online first: the diagnostic is free, and you only pay if you decide to go ahead.
Areas we serve
Google reviews
385 Google reviews
Great service and was fast fixed my hdmi port in less than a hour
I just got my ps5 hdmi repair and it only take an hour.same day repair definitely recommend
They always get me right and are super fast and efficient. Best prices in Columbus. Literally. Have gotten my screen repaired here multiple times and just got my Xbox a new hdmi port/cleaning. Absolutely perfect!
Straight answers before you come in.
Often, yes. A dead console is frequently one failed component and not a dead board. We measure the power rails, find the fault and tell you what it takes to fix it before any work starts, so you can decide.
It means repairing the board itself, under a microscope, instead of swapping the whole board: we find the chip, capacitor or trace that failed and replace only that.
Typically about 3 h. Many repairs are finished the same day, depending on the issue and on whether we have the part. We give you an estimate when we quote.
This repair carries a 90-day warranty on the installed part and the labor. It does not cover new impacts, drops or liquid contact after the repair. If the same fault comes back within that time, we look at it again at no charge.
It depends on your device and model. The diagnostic is free and you get an upfront quote before any work begins. If you decide not to go ahead, you pay nothing.
No. Walk-ins are welcome during business hours. Booking online or calling ahead is optional, but it helps if your model is uncommon and you'd like us to confirm the part first.
From the bench
Tech Deep Dive8 min read
If your PS5 won’t display on your TV, the cause is usually a bad cable or TV setting, a damaged HDMI 2.1 port, or a failed HDMI retimer chip on the motherboard.
Read article
Insights8 min read
Yes, game console repair in Columbus, Ohio is usually worth it, because common PS5, Xbox Series X/S, and Nintendo Switch failures like a broken HDMI port, overheating, power faults, and stick drift cost far less to fix than a new…
Read article
Repair Guide7 min read
A PS5 or Xbox with a black screen and no picture despite the console powering on is usually caused by a damaged internal HDMI port, often from a cable being bumped or pulled at an angle.
Read articleMore repairs
Electronics repair in Columbus, Ohio: free diagnostic, no appointment needed, no obligation.